| Hose
............................................................................................. |
| |
Clear
Flexible Hose - #22784 - 10 Feet Long x 2-1/2'' Diameter
Clear Flexible Hose - #22791 - 10 Feet Long x 4'' Diameter
Clear Flexible Hose - #26660 - 1 Foot Long x 4'' Diameter
(Ideal for short leads on power tools with ''Hard to get at'' dust
ports.)
Black Hose - #88551 - 10 Feet Long x 4'' ' Diameter
Black Hose - #89567 - 10 Feet Long x 2-1/2'' Diameter |
Blast Gate ..................................................................................... |
| |
Metal
Blast Gate - #20864 - Heavy duty construction is longer lasting
and less likely to jam than plastic blast gates.
Blast Gate - #88486 - Controls flow of air. 4'' diameter outlet
opening. #63547 2-1/2'' Blast Gate |
Fittings ......................................................................................... |
| |
4''
Quick Disconnect Fitting - #39620 - Clamped (Works with all of
the 4'' hoses.)
4'' Quick Disconnect Fitting - #22425 - Threaded (Works only
with #88551 Black 4'' Hose. Will not thread onto Clear Hose.) |
Clamps ........................................................................................ |
| |
(Shown
on the Right) - 4'' Steel Base Clamp - 5 Pack #64528
(Not shown) 2-1/2'' Steel Base Clamp - 5 Pack #64536
(Shown on the Left) - 4'' Spring Clamp - 5 Pack #64544 |
Floor Sweeps ............................................................................... |
| |
Floor
Sweep - #88452 - 3-5/8'' High X 6-3/4'' Wide X 24'' Long. Floor
sweep has a 21'' opening. |
Reducer ....................................................................................... |
| |
4''
To 3'' Reducer - #88494
4'' To 2-1/2'' Reducer - #89195
Shop Vac Adapter - #34654 - For 2-1/2'' Hose |
Hose Adapter .............................................................................. |
| |
Hose
Adapter #20871 Lets you easily and securely hook up a 4'' hose
directly to tools with a standard 2-1/4'' port. Works with most benchtop
tools. |
Connectors .................................................................................. |
Universal
Dust Port
2-1/2'' O.D. 2-1/4'' I.D.
#92031 |
Elbow
4'' - #88527
2-1/2'' - #63593 |
T-Connector
4'' - #88501
2-1/2'' -
#63563 |
Y-Connector
4'' - 88519
2-1/2'' -
#63585 |
Splicer
4'' - #88535
2-1/2'' -
#63555 |
Hoods .......................................................................................... |
| |
Table
Saw Hood - #88460 - 12-1/4'' X 12-1/4'' X 2-1/2'' High
Table Saw Hood - #88478 - 14'' X 14'' X 2-1/2'' High
Jointer
Dust Hood - #21025 - 8'' X 8'' and fits most 6'' and 8'' jointers
|
Separators ................................................................................... |
| |
Dust Collection Separator - #27351 fits a 30 gallon can and has
4'' inlet and outlet.
Mini Dust Collection Separator - #90343 can be used with a
5 gallon plastic bucket to connect to a shop vacuum. Inlet and outlet
are 2 1/2''. |
Grounding Kit ............................................................................... |
| |
Dust
Collection Grounding Kit - #18003 - Includes 50 bare copper multi
strand wire, two grounding screws, a 3/32'' drill bit, two right terminals,
and five wire connectors. |
Adjustable Hose & Pipe Hanger ...................................................... |
 |
Adjustable
4" Hose & Pipe Hangers - These sturdy pipe hangers with
a J-hook design allow you to hang your pipes and hoses from joists
or along the wall. Fully adjustable. White plastic. 5 per pack. -
#64505 |
 |
4"
Dust Hose Hanger Clamps - Pack
of 10 Steel Hanger Clamps makes the intallation of 4" diameter
hose quick and easy. - #68902 |
| Click
here for Dust Collection Hose, Fittings & Accessories |
